How to Combine 3G / 4G Dongle and Tethered Android on a PC

With Speedify, it’s easy to combine your 3G / 4G / LTE dongle connection with the connection from your tethered Android smartphone on your PC. In this article, we are going to walk you through how to do it.

Step 1: Install your 3G / 4G / LTE dongle on your PC. 
Connect the dongle through a USB port to your PC. If running Windows 10, it’s highly possible it will automatically set up the connection for you. In order to confirm this, click on the computer / Wi-Fi icon in the lower right area of the taskbar (systray) and check if a “Cellular” tile shows up.

If this doesn’t happen, make sure you run the installer program provided to you along with the 3G / 4G dongle. This may be directly on the dongle - check out “My Computer” / “This PC” for any CD / removable drives and run the setup program. You may be required to restart your PC after setting this up.

Step 2: Connect to the Internet using the 3G / 4G dongle. 
Make sure you run the proprietary software to connect to the Internet if that exists. Usually, it will be detected by your PC as a cellular connection or a Wi-Fi connection.

If you can’t connect, check to see if Windows installed a cellular adapter. Go to Network Connections (Windows key + X - “Network Connections”) and click on “Change adapter options” on the right. The 3G / 4G dongle should be listed there. If it’s not connected, click on “Diagnose this connection”.

If you still can’t connect to the Internet after troubleshooting this, contact your ISP/network provider.

Step 3: Tether your Android smartphone to your PC via Wi-Fi (most convenient), USB cable or Bluetooth.
As Wi-Fi tethering is most convenient as it's the fastest and requires no cables, we'll describe that procedure below. See more articles on how to tether your Android phone to your PC using the USB cable or Bluetooth in our knowledge base.

First, create a Wi-Fi hotspot on your Android smartphone (Wi-Fi tethering). 
To do this, you can usually swipe down on the notification bar and tap on the hotspot icon. You should also enable the cellular data connection if it’s off. Or, you can go to the Settings screen and toggle them on from the Networks (mobile data) / Tethering (Wi-Fi hotspot) areas.

Then, configure the Wi-Fi hotspot on your Android smartphone. 
Usually, there’s an icon in the notification area of the Android smartphone. Swipe down and tap on that. You’ll be able to set up the Wi-Fi hotspot: SSID and password.

Lastly, connect your PC to the Wi-Fi network. 
Click on the computer or Wi-Fi symbol in the lower right corner of the taskbar (systray). Turn on Wi-Fi by clicking on the tile on the lower side of the pop-up menu and select the Wi-Fi hotspot you set up on your phone. Enter your password (if you set one up) and you’re good to go.

Step 4: Start Speedify on your PC and combine the 3G / 4G / LTE cellular dongle and tethered Android smartphone connections on your PC. When you launch Speedify, the software automatically detects the two connections. You will see them each contained in a Connection Bubble near the top of the Dashboard.

And presto! You’re combining connections with the magic of Channel Bonding for improved speed, reliability, and security. You are now free to go forth and browse the internet, stream videos, and use your apps as you normally would.

Still need help? Contact Us Contact Us