How to Combine Two Wi-Fi Connections on Mac

With Speedify, it’s easy to combine 2 Wi-Fi connections on your Mac. In this article, we are going to walk you through how to do it, so you can benefit from a faster, more stable internet. (Please note, when combining connections, you should use an independent internet connection. Connecting multiple times to the same internet connection will usually not improve your speed.) 

Important note: There are some USB Wi-Fi adapters that require an additional software from your USB Wi-Fi Adapter manufacturer. On these occasions, we suggest you get in touch with the USB Wi-Fi adapter manufacturer or refer to your user manual, so you can attain the necessary device drivers. On this example, we are using the Edimax USB Wi-Fi Adapter network manager to connect. This may vary for your specific USB Wi-Fi adapter.

Step 1: Connect your USB Wi-Fi Adapter through a USB port to your Mac. Install the necessary drivers for your USB Wi-Fi network adapter. Some USB Wi-Fi Adapters may require you to restart your Mac.

Once the USB Wi-Fi Network Adapter has been installed, Turn On the Wireless Utility of your USB Wi-Fi Network Adapter.

To connect your USB Wi-Fi Network adapter to an existing Wi-Fi connection, you must choose the right Wi-Fi name of your connection by clicking Connect.

Type in your Wi-Fi Password.

If your Wi-Fi password is correct, you should now be connected to your Wi-Fi using your USB Wi-Fi Adapter via your Mac. There's a couple of ways to confirm your connection status.

Option 1: By checking your USB Wi-Fi Adapter Manager connection status.

Option 2: By going to Network via System Preferences on your Mac and seeing the Connected status on the left-hand side.

Step 2: Now, make sure your Macs built-in Wi-Fi is connected to a different Wi-Fi connection from your USB Wi-Fi Adapter. If you haven't connected to a Wi-Fi connection yet then you can refer to this link.

Step 3: Start Speedify on your Mac to combine 2 Wi-Fi connections. When you launch Speedify, the software automatically detects the two connections. You will see them each contained in a Connection Bubble near the top of the Dashboard.

And presto! You’re combining connections with the magic of Channel Bonding for improved speed, reliability, and security. You are now free to go forth and browse the internet, stream videos, and use your apps as you normally would.

Still need help? Contact Us Contact Us